SCHEDULE 2Requirements
PART 1Requirements
Scheme design
schedule 2 paragraph 4 4.—(1) Subject to sub-paragraph (2), Works Nos. 1, 14, 21, 31 and 44 must be carried out in general accordance with the general arrangement plans.
(2) The authorised development will not be in general accordance with the general arrangement plans if any departure from the general arrangement plans would give rise to any materially new or materially different environmental effects from those assessed in the environmental statement.
(3) The authorised development must be designed in accordance with the parameters specified in Table 1 below and the works plans and implemented in accordance with approved plans and any other approvals given by the relevant planning authority pursuant to these requirements.
Table 1
Work Type | Parameter | Part(s) of authorised development | Maximum value(s) and unit |
---|---|---|---|
AGI | Maximum fenced area at the Immingham facility | Work No. 1 | 10,500m2 |
AGI | Maximum height of buildings and structures at the Immingham facility, excluding the vent stack | Work No. 1 | 5m from ground level |
AGI | Maximum height of the vent stack at the Immingham facility | Work No. 1 | 25m from ground level |
AGI | Maximum height of fencing and gating at the Immingham facility | Work No. 1 | 3.2m from ground level |
AGI | Maximum fenced area at the Theddlethorpe facility | Work No. 44 | 13,500m2 |
AGI | Maximum height of buildings and structures at the Theddlethorpe facility, excluding the vent stack | Work No. 44 | 5m from ground level |
AGI | Maximum height of the vent stack at the Theddlethorpe facility | Work No. 44 | 25m from ground level |
AGI | Maximum height of fencing and gating at the Theddlethorpe facility | Work No. 44 | 3.2m from ground level |
BVS | Maximum fenced area of each BVS | Work Nos. 14, 21, 31 | 2,000m2 |
BVS | Maximum height of buildings and structures | Work Nos. 14, 21, 31 | 4m from ground level |
BVS | Maximum height of fencing and gating | Work Nos. 14, 21, 31 | 3.2m from ground level |
(4) The buildings and structures identified in Table 1 must only be constructed within the area for the Work No. of which they form part as shown in the works plans.